Complete Ophthalmic & Optometry Solutions

Tel / WhatsApp  +86 186 1198 1496

BJ-1000 wall-mounted closed-loop UV air purification and disinfection unit
ENOCHTEC · PROFESSIONAL EYE-CARE EQUIPMENT

BJ-1000 UV Air Disinfector for Ophthalmic Operating Rooms

Model

BJ-1000

Wall-mounted UV-C air disinfector for ophthalmic operating rooms, with a sealed UV chamber, ozone-free lamps and filtration for continuous air disinfection while staff and patients are present.

Need help selecting a configuration?
Tell us your market, clinical workflow and project requirements.

Product Highlights

Key Features

UV-C germicidal lamps at 253.7 nm, sealed inside the disinfection chamber, with no UV leakage outside the cabinet Ozone-free UV lamps: ozone concentration in room air below 0.1 mg/m³ during operation Continuous, dynamic air disinfection while staff and patients are present Closed-loop air circulation with high-efficiency filter and activated carbon filter Negative ion function Five selectable fan speeds; user settings are memorized Nine programmable time periods for timed automatic disinfection; minimum setting of 1 hour Infrared remote control and digital display UV intensity display, automatic UV fault detection and accumulated-time maintenance alarm Low-noise volute fan, high-quality ballast and anti-interference metal housing Wall-mounted design rated for 100 m³ spaces
Clinical Use

Applications

Ophthalmic operating rooms and eye surgery suites Ophthalmic laser and minor procedure rooms Pre-operative preparation and post-operative recovery areas Ophthalmic examination and consultation rooms Waiting and reception areas in eye clinics and hospitals Rooms within the stated 100 m³ rating per unit, subject to site assessment

The BJ-1000 is a wall-mounted UV-C air disinfector for ophthalmic operating rooms and eye surgery suites. It draws room air through a sealed disinfection chamber, exposes it to high-intensity 253.7 nm ultraviolet lamps and returns filtered, disinfected air to the room. Each unit is rated for indoor spaces of 100 m³.

Air disinfection for the ophthalmic operating room

Eye surgery teams work in a closed room with staff and patients present throughout the surgical list. Because the UV lamps are sealed inside the cabinet and no UV light leaves the unit, the BJ-1000 can run continuously during surgery, between cases and during room turnover, supporting ongoing air disinfection without clearing the room.

How it works

UV-C light at 253.7 nm damages the DNA and RNA of microorganisms and inactivates them. This is a physical disinfection method that adds no chemicals to the room. A built-in circulation fan draws air into the disinfection chamber, where it is exposed to the UV lamps before it is returned to the room. The high-efficiency filter and activated carbon filter help reduce dust, PM2.5, formaldehyde, TVOC, benzene and other airborne pollutants, and a negative ion function supports air cleaning.

Operation with people present

The UV lamps are ozone-free. The manufacturer states an ozone concentration in room air below 0.1 mg/m³ during operation. The unit runs without odor and does not corrode surrounding equipment, and a low-noise volute fan keeps operation quiet in the operating room.

Control, monitoring and maintenance

Five fan speeds and nine programmable time periods allow timed automatic disinfection to follow the surgical schedule, and user settings are memorized. The unit is operated by infrared remote control and has a digital display. A UV intensity display, automatic UV fault detection and an accumulated-time maintenance alarm help staff monitor lamp status and plan filter and lamp servicing. Long-life UV germicidal lamps, a high-quality ballast and an anti-interference metal housing support stable operation.

Important use note

The BJ-1000 supplements air disinfection in ophthalmic operating rooms. It does not replace the operating room’s ventilation and air-handling requirements, routine environmental cleaning and surface disinfection, or the validated sterilization and reprocessing of ophthalmic instruments. Install and operate the unit according to the manufacturer’s instructions and applicable local requirements. Direct exposure to UV sources is not permitted.

Project Fit

Configurations & Options

Wall-mounted installation Five fan-speed settings Nine programmable time periods High-efficiency and activated carbon filtration Infrared remote control

Final configurations, accessories and documentation are confirmed according to market and project requirements.

Technical Specifications

Model BJ-1000
Product type Wall-mounted UV-C circulating air disinfector
Primary application Ophthalmic operating rooms and eye surgery suites
Installation Wall-mounted
Rated space volume 100 m³
Power ≤123 VA
UV wavelength 253.7 nm (UV-C)
UV lamps Ozone-free, sealed inside the disinfection chamber
Ozone concentration during operation <0.1 mg/m³
Treatment system Air filtration + UV treatment + circulation
Filtration High-efficiency filter + activated carbon filter
Additional function Negative ions
Speed settings 5
Programmable operation 9 time periods; minimum 1 hour
Control Infrared remote control; digital display
UV monitoring UV intensity display and automatic UV fault detection
Maintenance indication Accumulated-time maintenance alarm
Occupied-space operation Continuous operation with people present; no UV leakage outside the cabinet

Discuss This Product with ENOCHTEC

Request specifications, configuration guidance or a distributor quotation for your market.

Product Questions & Buying Guidance

Practical answers for clinics, hospitals, distributors and project buyers evaluating this product. Final configurations are confirmed for the destination market and intended workflow.

What information is needed for an accurate quotation?

Please share the destination country, intended clinical use, expected quantity, preferred configuration, local power standard and any required regulatory or tender documents. This lets ENOCHTEC prepare the most relevant technical and commercial proposal.

Yes. Available accessories, interface options, language, power standard, documentation and room integration can be reviewed for the destination market. Any change remains subject to the selected model, order quantity and regulatory requirements.

ENOCHTEC can support model selection, portfolio planning, technical documentation, product positioning and after-sales coordination for distributor and project orders. Training scope and service arrangements are confirmed according to the product and market.