Complete Ophthalmic & Optometry Solutions

Tel / WhatsApp  +86 186 1198 1496

Non-Contact vs Rebound Tonometer: How Each Works and Which to Choose

Updated November 2026 · ENOCHTEC product team

A non-contact tonometer (NCT, often called an air-puff tonometer) measures intraocular pressure (IOP) by flattening the cornea with a short pulse of air, so nothing touches the eye. A rebound tonometer is usually handheld and bounces a very light disposable probe off the cornea for an instant, typically without anesthetic drops. Table-mounted non-contact tonometers suit routine measurement of patients who can sit at the instrument; handheld rebound tonometers suit children, bedside checks, outreach work and patients who find an air puff difficult.

How a non-contact tonometer works

The patient sits at the instrument with the chin on the chinrest. The tonometer aligns with the eye, then directs a brief pulse of air at the cornea while a light sensor detects the moment the cornea is flattened. The higher the pressure inside the eye, the more air force is needed to flatten it. Because there is no contact, no anesthetic drops or disposable probes are needed.

Automatic models such as the ENOCHTEC ST-1000P find and align on each eye in turn and can measure both eyes with one touch.

How a rebound tonometer works

A rebound tonometer sends a very light, disposable probe briefly against the cornea and records how quickly it slows down and rebounds: the higher the eye pressure, the faster the probe decelerates. The probe touches the cornea only for an instant, so rebound measurement is typically performed without anesthetic drops. Because the instrument is small and battery powered, it can be taken to the patient rather than the patient to the instrument.

Where Goldmann applanation fits

Goldmann applanation tonometry, performed at the slit lamp with anesthetic and fluorescein drops, remains the most widely used clinical method. Non-contact and rebound tonometers are often used alongside it. Readings from different methods can differ, and they can also be affected by corneal thickness, so the clinician decides when a result should be confirmed with another method.

Non-contact vs rebound tonometer at a glance

Swipe sideways to see all columns →

Non-contact (air-puff)Rebound
Contact with the eyeNone: a pulse of air flattens the corneaA light probe touches the cornea for an instant
Anesthetic dropsNot neededTypically not needed
ConsumablesNone for the measurementDisposable probes
FormatTable-mounted, mains poweredHandheld, battery powered
Patient positionSeated at the instrument with the chin on the chinrestSeated or reclined (models with vertical and horizontal modes)
Patient experienceA brief puff; some patients blink or flinchNo air puff
Typical settingRoutine IOP checks in clinics, optometry practices and screening roomsChildren, bedside checks, outreach and screening work, patients who cannot sit at a table instrument

When a non-contact tonometer makes sense

  • Routine measurement at volume: automatic alignment and one-touch measurement of both eyes keep the step short.
  • No consumables: there are no probes to restock for each measurement.
  • Pre-test or screening rooms: staff can run the measurement before the patient sees the clinician.
  • Corneal thickness compensation: some models, such as the ST-1000P, can adjust the IOP reading for central corneal thickness.

When a rebound tonometer makes sense

  • Children and patients who cannot sit at a table instrument: the instrument goes to the patient.
  • Bedside and ward checks: models with a horizontal mode can measure reclined patients.
  • Outreach and screening away from the clinic: small, light and battery powered.
  • Patients who find an air puff difficult: there is no puff of air.

Many clinics keep more than one type and choose by patient and setting. Whether a method is appropriate for an individual patient is decided by the treating clinician.

ENOCHTEC non-contact and rebound tonometers

Swipe sideways to see all columns →

ST-1000P non-contactRT-500 rebound
Measurement methodAutomatic; dual-light and air-pressure sensingRebound tonometry, disposable probe
IOP range1–30 mmHg / 1–60 mmHg (selectable)3–70 mmHg
ReadingsUp to 10 measurements per eye; three selected results printable per eyeAverage shown after three valid measurements
Precision (listed)Confirmed with quotation±1.5 mmHg (3–25 mmHg); ±2.5 mmHg (above 25 to 70 mmHg)
Corneal thickness compensationAvailable on ST-1000P (not on ST-1000)—
OperationAuto / manual; automatic left/right eye switching; one-key measurement of both eyesVertical and horizontal measurement modes
Display and positioning10.1-inch tiltable touch display; motorized chinrestHandheld
OutputUSB 2.0; result printing (confirm built-in printer in the quotation)Wireless infrared thermal printer
Power220 V / 50 HzDC 3 V (2 × AA batteries)
Weight19.7 kg0.2 kg (net)

Specifications are for reference. The exact configuration, accessories and documentation for your market are confirmed in your quotation.

See every tonometer in the tonometer buying guide, or how IOP measurement fits into an ophthalmology clinic setup.

Frequently asked questions

Does a non-contact tonometer touch the eye?

No. A non-contact tonometer uses a short pulse of air and a light sensor, so nothing touches the cornea and no anesthetic drops or disposable probes are needed.

Does a rebound tonometer need anesthetic drops?

Rebound measurement is typically performed without anesthetic drops, because the probe touches the cornea only for an instant. Follow the instrument’s instructions for use and your local clinical protocol.

Is the air puff of a non-contact tonometer painful?

The air pulse is brief and is usually felt as a mild puff rather than pain, although some patients blink or flinch. For patients who find it difficult, a handheld rebound tonometer is another option the clinician may consider.

Why can readings differ between tonometers?

Different tonometers measure pressure in different ways, and readings can also be affected by corneal thickness and patient factors. The clinician interprets the result together with the wider examination and decides whether confirmation with another method is needed.

What IOP ranges do ENOCHTEC tonometers cover?

The ST-1000P non-contact tonometer offers selectable ranges of 1–30 mmHg and 1–60 mmHg. The RT-500 rebound tonometer measures from 3 to 70 mmHg.

Choosing a tonometer for your clinic?

Tell us where the measurement will happen, which patients you see and how many measurements you expect per day. We will recommend a non-contact or rebound tonometer, or both, and send a quotation.

Request a quote

This guide is general information for equipment buyers. IOP measurement, interpretation and treatment decisions are made by qualified eye-care professionals.

© 2026 Beijing Enoch Corporation. All rights reserved. No part of this guide may be reproduced without prior written permission. Brief quotations with a link to the source are welcome.